Our KPIT ventilator is engineered with the best national as well as international benchmark parameters and features and is designed to be portable, robust, user-friendly and safe to provide support during the entire spectrum of need, from
ambulances to ICUs.
Adding to our engineering expertise is our collaborative team of best-in-field partners that include expertise in equipment manufacturing from Accurate Industrial controls Pvt. Ltd. & ergonomic design of medical equipment from Design Directions, along with the support of Department of Technology, University of Pune.
Upgraded version
Compressor compatible
Base version
AMBU bag compatible
The ventilator would be available in two models called, Vyoman (base model with AMBU bag) and Vyoman Plus (compressor compatible model) and is the only such versatile ventilator currently available. With calibrations and certifications completed from NABL accredited laboratories, the units are tested, reviewed and validated by multiple doctors across several hospitals and with that, the KPIT ventilator is all ready to go into full production.
Our years of expertise in mechanical and electrical engineering along with embedded software has been the pillar of strength to enable a top-notch, fully functional, uncompromised solution. In addition, most of our components are locally sourced supporting the made-in-india drive, and leading to an excellent and timely after-sales support system.
Vyoman represents KPIT’s contribution towards critical care during the current trying times and lends a ray of hope towards a better, safer world.
Our team who worked tirelessly on our ventilator with our chairman Ravi Pandit
KPIT Technologies innovates versatile ventilators called "Vyoman"
|
Tidal Volume: |
100ml – 800ml *50ml- 2000ml |
|
Modes: |
Assist – Volume Control Assist – Pressure Control *Synchronized intermittent mandatory Ventilation (SIMV) – Volume Control *Synchronized intermittent mandatory Ventilation (SIMV) – Pressure Control CPAP / PSV *BiPAP |
|
FiO2: |
Fraction of Inspired O2 concentration: Provision to connect O2 supply. FiO2 % to be controlled externally |
| Peak pressure: | 0 – 50 cmH2O |
| Respiratory Rate: | 0-60 bpm |
| PEEP: | 0-30 cmH2O (increment of 0.5cmH2O) |
| I:E ratio: | 1:4 to 4:1 (increment of 0.1) |
| Exhaled volume measurement | |
| Power: | Single phase 220VAC/110VAC 50/60Hz
Battery : Provision to connect 24V DC External Battery. Seamless changeover between power source |
| Exhaled air virus filter included (Electrostatic filter HME) | Onboard Display : IP66, 7 inch Multicolor backlit, Graphical Display Communication : USB port, Ethernet (TCP/IP), RS232/485 |
| Microprocessor based system: | Expandable Memory for Data logging : 4GB to 32GB |
| *Remote monitoring through Smartphone Application | |
| Configurable Alarms with
Audio Visual Indication: |
Auto/Manual Reset, Action on Alarm Self-Test
Power supply Peak Inspirator Pressure Low Inspiratory Pressure (Airway disconnection) PEEP > Set PEEP for n Consecutive cycles VTi < Set VT * 0.75 for 6 consecutive cycles Respiratory Rate System Faults: Memory, Temperature *FiO2 < Set FiO2 for n consecutive cycles *SPO2 < Set SPO2 value (Normally 90%) (Optional) Vital components inactive |
| Graphics mode for Display and monitoring of Set and Actual parameters | Set parameters: Respiration Rate, Tidal Volume, PEEP, I:E, Pressures, Flow, Apnea, FiO2 etc.
Actual parameters: *Scalars (Volume/Pressure/Flow Vs time), *Loops (Flow/Pressure Vs Volume), *Calculated Values (Inspiratory, Expiratory Pauses) etc |
| Robust design suitable for 24×7 operation of more than 21 days | |
| Power On self-test | |
| Easy to service, uses standard easily available medical components | |
| Can be interfaced with *AMBU bag (Base Model), *External Compressor, *Blower/Turbine | |
| *Provision to connect external Nebulizer | |
| *Provision for High Flow Oxygen just before the HME | |
| *OTA (over-the-air) Upgrade of system software upgrade | |
| Suitable for prone position. ( Head cushion available as accessory) | |
| *Solution applicable for invasive as well as non-invasive Ventilation | |
| Data logging, Alarms log and event logs supported | |
| *Remote monitoring and fine adjustments through a smart phone | |
| User interface: Mirrors the interface that doctors are comfortable with and use regularly | |
| Portable and versatile: The product can be used in hospitals, ambulances, make-shift quarantine areas as well as at home by patients | |
Contact us:
Jayada Pandit
Jayada.pandit@kpit.verifinow.in | Ph: +91-9822041814 | www.kpit.com
Plot Number-17,
Rajiv Gandhi Infotech Park,
MIDC-SEZ, Phase-III,
Hinjawadi, Pune – 411057
Phone: +91 20 6770 6000
Frankfurter Ring 105b,80807
Munich, GERMANY
Phone: +49 89 3229 9660
Fax: +49 89 3229 9669 99
